BS EN 1337-10-2003 Structural bearings. Inspection and maintenance
|
ID： |
262144F1BF124359BD764EDCB01D075E |
|
文件大小(MB)： |
0.26 |
|
页数： |
20 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,1337-10:2003,Corrected and,reprinted,November 2003,Structural bearings —,Part 10: Inspection and maintenance,The European Standard EN 1337-10:2003 has the status of a,British Standard,ICS 91.010.30, , ,,,,, , ,BS EN 1337-10:2003,This British Standard, was,published under the authority,of the Standards Policy and,Strategy Committee on,24 July 2003,. BSI 5 November 2003,ISBN 0 580 42319 0,National foreword,This British Standard is the official English language version of,EN 1337-10:2003.,The UK participation in its preparation was entrusted to Technical Committee,B/522, Structural bearings, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep the,UK interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 17, an inside back cover and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 1337-10,July 2003,ICS 91.010.30,English version,Structural Bearings - Part 10: Inspection and maintenance,Appareils d'appui structuraux - Partie 10: Surveillance Lager im Bauwesen - Teil 10: Inspektion und,Instandhaltung,This European Standard was approved by CEN on 12 June 2003.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United,Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2003 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 1337-10:2003 E,EN 1337-10:2003 (E),2,Contents,page,Foreword .. 3,1 Scope. 4,2 Normative references . 4,3 Definitions and symbols 4,4 General requirements for regular and principal inspections . 5,5 Regular inspection 5,6 Principal inspection . 6,7 Servicing and replacement .. 10,Annex A (informative) Explanations .. 11,Annex B (informative) Report of inspection of bearings. 12,EN 1337-10:2003 (E),3,Foreword,This document (EN 1337-10:2003) has been prepared by Technical Committee CEN /TC 167 "Structural bearings",the secretariat of which is held by UNI.,This European Standard shall be given the status of a national standard, either by publication of an identical text or,by endorsement, at the latest by January 2004, and conflicting national standards shall be withdrawn at the latest,by January 2004.,The entire European Standard EN 1337 consists of 11 Parts listed here below:,Part 1 – General design rules,Part 2 – Sliding elements,Part 3 – Elastomeric bearings,Part 4 – Roller bearings,Part 5 – Pot bearings,Part 6 – Rocker bearings,Part 7 – Spherical and cylindrical PTFE bearings,Part 8 – Guide bearings and restraint bearings,Part 9 – Protection,Part ……
……